I started using Navidrom as suggested by someone in the group. I do not have audio books but it has a spot for them. If you want to get all fancy like you can use the MusicBrainz Picard for tagging stuff differently (or something like that I am really feeling the glue and sealant they used to put down the laminate in my place right now) but AudioMuse-AI does something to (again really feeling it).

I use a Flint 2, I think I have something like 5 AP’s On it and it covers my whole home. I have a bunch of vLANs as well for the APs and VPN’s. It came with some custom OpenWRT install but I flashed it with a vanilla version instead. I was using an Apple Airport Extreme prior to getting the Flint 2, but my place flooded and I got board so I took up the hobby of home labbing while I wait on insurance to get things rolling (after a few months the flooring is finally going in tomorrow) my original plan was going to be use the Airport as an extender but I did not need that, but yes APs with the same SSID will work together. My Flint 2 has SMB setup to back up its settings to a pi I have on my LAN.

I decided that living on a hope and a dream of maybe someday seeing if my Mac Mini still worked I can now gleefully say it is working* if I cannot figure out how to update it further oh well I will just continue on with it as is and harden it the same way I do everything else. But right now it is downloading my music library, which I will promptly backup before trying to update it further.

*I need to figure out how to update it to the last OS version it can handle.

You should really have a good hardware firewall before you do that. Change ports, change ports for everything you can nothing I run is on the standard port I make sure of that other than 80 and 443 for unbound I would if I could but I like having access to the internet I should have mentioned that with pihole.

Thanks for letting me know.

On all of my raspberry pi’s excluding my HAOS pi I have Docker; (I am thinking of adding something so I can see all my images visually, funny story I was looking on docker to see everything I have running and I guess I do have a service for this).

2 instances of pihole across 2 of my pi’s; (one primary, which has been migrated to docker and a secondary which is still running bare metal I have docker on that pi but just have not got around to migrating it yet maybe that is a today project) highly recommend you start with a linux distro that is right for you and start with docker and pihole (You could probably stick with windows or MacOS if you want but I highly recommend linux, there are other whole LAN ad blockers, pihole is just the one that works for me. Just to be funny I run them on port 31415!) on a device or two you are not afraid to leave running 24/7 that is why my homelab is spread across different 4 different pi’s and a Flint 2 router.

Maybe on two pi’s I have Nebula-sync; to keep my piholes in sync but I know I have it on one of them.

On my pi 5 with the most RAM I have:

Caddy; this could go on prior to pihole, but it is to give everything easy to remember domain names and to allow some to be open to the world while keeping others to the LAN/VPN

After those four things I would suggest searXNG; to replace whatever search engine you use when you go through and pick which engines it uses to do searches please do not select the Google. With searXNG you do not get all that AI crap I hear people get now, or the paid advertisement links at the top of the results, you also get to weigh which engine you want to use more.

Vaultwarden; with that I can use all of bitwarden’s services for free

Immich, because I am not paying a third party to store just my photos

Nextcloud, but I am getting off of that, it does all of the file sharing that I need with my devices that cannot use rsync calendars and contacts but it tries to do to much.

Down detector; to tell me if there are problems with my devices (sends me emails if one of my devices goes off line).

Paperless; to keep important documents in a easier place to find.

On another pi 5 I have:

The arr stack, I should really get jellyseeerr working!

Transmission, the bittorrent client it is running CLI with a web interface. I have it setup to download a copy of the raspberry pi OS every time there is a new release and to host it until the next new release, everything else I have a ratio of 3.

Jellyfin; (I will fight you if you think plex or emby are better), if I wanted to share my media with people I could create another VPN exit that only allows people to Jellyfin.

I guess I have Navidrone; for music streaming? I should probably remove that because I have Jellyfin that I plan on using.

Cowrie, is the honey pot sitting on port 22.

On another pi 5 I have

Ghost; for my blog/web design service, I am considering exploring more options as it is more geared towards people wanting to get money.

I guess I have matomo; to monitor my self hosted blog, did not know that.

On a pi 4 I have

HAOS; I have so many things running in HAOS, but the one service I am most proud of is my reminders. The reminders just started as a reminder for me to take my medication because the app I had purchased decided that the fact that I had purchased it was not good enough and they wanted to charge me a subscription, so I setup Home Assistant to remind me and that quickly became reminders to do other things as well all on my apple watch.

I have a retired ipad running a HA kiosk in my kitchen; it tells me things like what lights are on, how many times I have had bots try to penetrate me, speedtest, transmission stats, and my ecobee settings. I am thinking of setting up an old phone to run as a separate kiosk in my bedroom as a clock/weather screen on my bedside table and I am hoping to get a hand me down old ipad to act as another kiosk in my living room, more to watch for docker containers needing updates, maybe the also the weather and bandwidth monitor.

OpenWRT on a Flint 2 because the firewall my ISP’s firewall/modem like most ISP’s is a joke so I have it set to pass through to my own with 2 static IP’s one of them was originally going to be for mail but I quickly discovered how silly of an idea that was.

Wireguard; I think it is on my firewall, on one of the IPs I was going to host mail on the other but I came so close to ripping out my hair trying to do that so I got a hosted service through easydns it has a wildcard function so I can still get unlimited free trials to whatever instead of going into hosthero’s cpannel and spinning up a new address)

Crowdsec so I get to watch how many bots try to penetrate me in a day, week, month, or ever. It is in the 100’s a day, before I knew I could/should change my SSH port I had port 22 open to the WAN, this was long ago but still it was a bad idea. 22 is now open as a honey pot.

I have Crowdsec-bouncer that stops known bad actors from trying to get in.

I am sure I have other services on my firewall but I cannot tell what is an actual openwrt service and what is something I have added, but it is a vanilla install with all kinds of things added extra. .

Don’t know if you would count CUPS or scanjs as self hosted but those are run for my printer/scanner on a pi.

I have an old mac mini I am thinking of plugging in so that I can download all my music and add it to Jellyfin, than I am debating on if I want to install debian on part of the drive and keep MacOS on part of the drive so that I can actually use the bluray drive I have as far as I know there are no bluray drivers for linux because the big movie producers are scared of piracy, not like they are trying to rape us consumers over the hot coals.