It had Windows installed and it was taking up 3 partitions or something so i destroyed its recovery drive and i probably need to start fresh with just Linux
Is there a way to just reset and do everything over like by repartitioning and installing something like Fedora or Ubuntu? I tried to jnstall PopOS and i think i settled on the ZorinOS or something but I can’t get Ethernet or my VPN working and I want to be able to download “app” “installers” like you do with PC or MacOS.
Baby steps
Edit: fucked up the pc is way harsh. ZorinOS is technically stable-y-ish installed, its just Windows is gone but maybe thats the opposite of fucked 🤔
Edit: so i checked and its ZorinOS. What do y’all think of Zorin, should I still migrate to something more ubiquitous and longer-running?
older computer
What are the specs?
Is there a way to just reset and do everything over like by repartitioning and installing something like Fedora or Ubuntu?
You mean wipe everything on your HDD/SSD and install something that can make use of all of its storage capacity? That’s basically included on every distro installer.
I can’t get Ethernet or my VPN working
That’s definitely not expected behaviour.
I want to be able to download “app” “installers” like you do with PC or MacOS.
What do you mean? Is it either one of the following? (Perhaps both are fine with ya?)
- Download software from a website and install it?
- Use a app/software store application in which you can find and install apps/software? This is basically what’s found on modern phones.
What do y’all think of Zorin, should I still migrate to something more ubiquitous and longer-running?
Zorin OS should be fine~ish. The problem with asking the community is that they’re often more interested in laying out their favorites rather than what would be closest to the objectively best option 😅. If, however, your problems with ethernet persist on Zorin OS while another distro’s live ISO doesn’t have that problem, then I suppose it would only make sense to switch.
Windows is gone
Sounds like secureboot shinanigans. Windows just needs to be on its own total drive.
I’d just use Kubuntu. Had to fix CachyOS twice this year.
I’m not a Linux expert, but I’ve had good luck making bootable Linux USB drives and testing whatever I want on those before making the actual install. It’s a fun way to switch flavors too.
I ran Puppy Linux off of a flash drive on my main rig for about a year years ago before I got around to replacing the hard drive that failed…
Nothing is more permanent than a temporary solution!
Ok ok we’re still relatively newish to Linux deep lore, what the hecc is puppy Linux?!
https://puppylinux-woof-ce.github.io/
Super small Linux distro made to run off a bootable flash drive. Typical size of the OS is under 2gb, so just about any flash drive you find these days is big enough to use.
Works great to get an old computer up and going again, quick and easy to setup since you don’t have to install anything on the computer. Perfect for light Internet usage, office/school work, etc. I wouldn’t try to run AAA games through it, but I used to play The Binding of Isaac and it handled it fine.
Use mint. Every Linux first timer should just use mint. It’s easy AF and it works
unless your cpu etc is new, then mint is the worst advice you will ever receive (been there)
Why?
On my desktop I use cachyOS but my laptop (2021 dell xps, I think 8th gen Intel) is running mint2021 8th gen intel isn’t “new cpu” by any standards Mint and most Debian flavors are horribly out of date
Choose a distro, follow their installation guide.
This. It’s really that easy, if you take it slow. Maybe grab a beer/soda/coffee on the way in
Each unto their own, but I would never mix those 3 together…
Don’t forget to account for Nvidia.
My old pc (now used mainly for watching movies etc) has a nvidia card in it, the only distro I ever had issues with was debian, which is unlikely to be recommended, especially now. People really do have a bad habit of recommending non-awesome distros to newbies though, as op’s list of options shows.
I am a Debian man, and I will hear no words about it being non-awesome.
They really need to fix the Nvidia compatibility though…🤔
But it’s just so…clean in there. An empty canvas on which I can paint. So empty, in fact, that it doesn’t have Nvidia drivers. Just as Murdock intended!
This is why I love Arch. It comes with nothing installed and everything available!
I had debian installed as a back up distro on 2 computers due to it not be corrupted like fedora, and ubuntu. It installed easily on the amd system, as expected. I ended up using a script to instal it on the intel (with integrated graphics) and nvidia system. It just didn’t want to play nice.
Then debian decided to hold a vote with 20 different options… all of them including debian going ai
Now debian has gone bye-bye
You enjoy your awesome though :P
Whichever distro you decide on (the current top comment is correct in implying that it really doesn’t matter), just look up how its program manager works. It’s usually not hard to use, but it does vary from distro to distro.
Unlike Windows, you usually want to install Linux programs from the distro’s “app store” instead of downloading each program from its website. However, what’s called “app image files” do exist. I want to emphasize, though, that these should be your last resort.
You shouldn’t use installers like you do on windows.
You either rely on the disteo repo to have an up to date version, you rely on a community repo to not get compromised again, or you hope the application devs have a repo you can add to your package manager.
wellthen there are Flatpaks, which are fairly easy to install, cross-distro etc. But essentially above is correct installing “random sh#t” on Linux is possible but WHY would you want to bring really bad security practices into environment where it a lot easier to implement good security?
If you want to compleetly start over you can write a new partition table. I usually boot a gparted live disk and prepare my partitions there.
https://gparted.org/livecd.php
For old PCs I can recommend Linux Mint. It’s easy to use and low on ressources.
In short, yes, Fedora, Ubuntu, or whatever will be able to install on your laptop just fine. Since you seem relatively new, I would suggest Mint as it is aimed at new users.
App installers, the way you are accustomed to from Windows, aren’t really a thing in Linux. Most applications are installed by your distro’s package manager. For those that aren’t, there is often a choice of either downloading a package for your distro ( debs in the case of Debian-derived distros like Ubuntu and Mint, rpms for Fedora and friends ) or using something like Flatpack. But really your package manager will handle most things you are looking for.
“Linux is so easy just install it”
Linux is not easy. macOS is easy. Windows is easy. Linux is a jalopy that you enjoy fixing an occasionally get working.
Back when I was first trying Linux out on my parent’s PC a decade ago, I’d have agreed.
But these days it’s legitimately easy. I’ve got Mint XFCE on an ancient Toshiba from 2014, Nobara on my gaming system and Fedora on my main laptop, and all of them just work. I installed Linux and the only maintenance is updates, no fresh installs or anything, and they’re all still working years later.
I recently updated to Windows 11 on my Mum’s PC and it took me an hour and a half. She also frequently messages me to ask for support. I wish I could convince her to move to Linux too…
Yet here OP is…
I have had so much more trouble with Windows than Linux.
I get it but sometimes you gotta make the medicine a bit sweet so the concentrated fly vinegar oil goes down at all
Another comment: fedora is a good distro. Mint is also good. Both are pretty straightforward, will do what you want, and are easy to work with. They are recommended a lot for good reason.
There are three main types of software.
- software installed from the distribution’s repositories
- flatpaks - which are basically sandboxed software bundled with their own dependencies
- app images - which are basically executables like a windows .exe
When looking for software, I think most people install them in that order. (Some distros are immutable and therefore 2) is often the first choice but that’s getting ahead of ourselves a bit)
Hope this helps.
I have installed Linux on many things. Post the output of your “lspci” and the output of your “ip address”
either do linux mint or ironically arch (as a starting off point!)
linux mint is a simple to follow gui from a liveusb.
arch is trickier, but I actually find archinstall is really straightforward and fast. once you unfuck the computer, you can take your time to choose something more apt.What device is it? It’s unusual for Ethernet to not work .
Pc tower
It might sound stupid, but turn off your PC, switch off the power supply, remove the power cable, wait for about 30-40 seconds, then plug the cable back, switch it on and power on your desktop.
It might be an issue caused by Windows fast startup. Even though you completely removed Windows, the power state might still be ‘hanging’ around and causing issues.
I would add “press the power button for 10 sec with everything unplugged.” That should clear any remaining power storing problematic settings. That’s about as fresh as you can get!
Yeah, but that’s like saying “blue. The kind of car I drive is blue.”
If you can get logged-in and issue an
lspciit’ll help a lot.Just take a pic of the output with your phone if you’re on the console. We’ll cope.
For an older system I’ve been very pleased with the performance of Bodhi Linux. And the UI is very customizable.
Now that’s a name I haven’t heard for years. Hope they’re doing fine.
